CISinks Hot/Cold Peel DTF Film 100 Sheets A4

<strong>DTF film Q&amp;A</strong><br><br> <strong>1. When the modified Epson printers are unable to detect the film, how to solve? </strong><br> Most modified printers cannot directly identify the film: <br> Step 1: To help your printer recognize the film, try turning off "Check Paper Size" setting<br> Step 2: Paste white paper sticker about 1x4cm, Or draw a horizontal line with white marker at the bottom corners of the film printing surface (matter side) to help the printer recognize the film.<br><br> <strong>2. Can DTF film be reused?</strong><br> There is a coating on top of the DTF transfer film, which means it can only be used to print on a T-shirt once. The coating on the film is removed after the transfer process and cannot be used again. You will need to use another sheet of DTF film. <br><br> <strong>3. Does the dtf transfer film need the dtf power?</strong><br> Yes, You use the film to print with your DTF ink and then you cover it with the powder afterwards and cure it. <br><br> <strong>4. Can you use DTF film on non-fabric surface? </strong><br> NO<br><br> <strong>5. Will the pattern fade after washing? Can it be machine washed?</strong><br> No fading is one of the advantages of our products. It is washable.<br><br> <strong>6. How to distinguish the printing side?</strong><br> The printing side is matte/coated and the back side is smooth.<br><br> <strong>7. Can I use a sublimation printer?</strong><br> We always recommend that you use a DTF printer or a modified DTF printer to get better results.

• Film: Specially coated matte printing side for better ink absorption for fuller prints, allowing for brilliant color-rich transfers. Glossy reverse side w/ anti-slip layer for smooth printer feed.Easy handling, no weeding necessary, PRINT on matte side
• Quality: These sheets can be peeled hot or cold and stay looking fresh long after being washed. High washability and stretch resistance. Can be properly stored away for use later
• Size: A4 (8.25" x 11.75" / 210mm x 297 mm) - Thickness: 75-micron (0.075mm//3-mil). Suggested transfer temperature: 266 - 320 °F. Suggested Press Time: 6 to 10 seconds
• Compatibility: Compatible with all Modified Desktop DTF Printers and used with hotmelt adhesive powder.*NOTE*If the printer is not recognizing the film,try turning off the "Check Paper Size" setting. If not, you can put a white paper sticker or drawing a white line on the bottom corners of the film(matte side)
• Designed to give you stunning and durable prints on most fabrics, both light, and dark. Cotton, polyester, leather, canvas, 50/50 blends, t-shirts, pillows, caps, gloves, sneakers,etc